Founded in 1996, Jiayong Houseware Co., Ltd. is a China transfer case manufacturer and designer specializing in a wide variety of housewares and household items in China. We have two factories covering 50,000 square meters, and is fully equipped with injection molding, compression molding, CNC machining and quality control. Our raw materials are sourced only from the best suppliers such as Dow Corning (US), GE (Japan), Rhodia (France), Wacker (Germany) and HRS (Korea). Now we are starting pay attention to product R&D and OEM transfer cases services.

Type: Progressive On Demand
Full time 4WD operation sends power to both the front and rear axles under normal driving conditions and automatically transfers torque to the front as needed
Gerotor pump in the transfer case transfers power immediately to the front axle when wheel slip is detected. provides four-wheel drive power automatically, with no driver input
Includes a low-range mode for severe road conditions and low-speed pulling power
Includes a neutral mode that allows the vehicle to be towed
The NV247 is an on-demand 4-wheel drive transfer case with two operating ranges and a neutral position. Under normal driving conditions, the system operates conventionally, and the majority of available torque is applied to the rear wheels. However, when front-to-rear wheel speed variations exist, the progressive differential transfers torque to the axle withthe better traction, thus minimizing wheel spin and maximizing control.

Type: Full-time
Full time 4WD operation sends power to both the front and rear axles under normal driving conditions.
Open center differential enables four-wheel drive operation on any road surface.
Shift-on-the-fly capability allows switching between two-wheel drive, part-time high range 4WD and full-time 4WD, at speeds up to 55 mph
Available Trac-Lok limited-slip rear differential with torque-sensing device for maintaining traction on slippery surfaces. Automatically distributes torque to the rear wheel with the most traction, thereby reducing wheel spin at the other wheel
The NV242 provides full time 2-wheel, or 4-wheel drive operation. A differential in the transfer case is used to control torque transfer to the front and rear axles. A low range gear provides increased low speed torque capability for off road operation. The low range provides a 2.72:1 reduction ratio
The 2WD and 4x4 full time ranges can be used at any time and on any road surface. The 4x4 part-time and 4 Lo ranges are for off road use only. The only time these ranges can be used on hard surface roads, is when the surface is covered with snow and ice.

Go to China Light Industry & Daily Use Manufacturer Catalog or China Light Industry & Daily Use Products Catalog to find more China Products!