Founded in 1996, Jiayong Houseware Co., Ltd. is a China lamp holder manufacturer and designer specializing in a wide variety of housewares and household items in China. We have two factories covering 50,000 square meters, and is fully equipped with injection molding, compression molding, CNC machining and quality control. Our raw materials are sourced only from the best suppliers such as Dow Corning (US), GE (Japan), Rhodia (France), Wacker (Germany) and HRS (Korea). Now we are starting pay attention to product R&D and OEM lamp holders services.

Lamp Holders are handy for mounting an extension lamp onto the side of the loom. They are designed for our Standard Low Castle Floor Loom and can be installed on one or both sides of the loom. The High Castle Standard Floor Loom already has holes drilled on the top castle to accommodate a lamp. You can also mount a Lamp Holder on a Mighty Wolf Loom, but you need to request shorter screws when ordering it. On the Baby Wolf, a Lamp Holder mounted on the side castle will restrict the folding ability of the loom. However, the Baby Wolf High Castle Tray has holes in the top for the post of an extension lamp, so a lamp holder is not needed when using a high castle tray.

The LM15EB is a Lamp module which fits into a standard bayonet lamp holder. Provides ON and OFF functions and responds to ALL-LIGHTS-ON and ALL-UNITS-OFF X-10 commands.
The X10 House Code and Address is programmed via an X10 transmitter (IR7243, Mini Controller, Maxi Controller, etc). Note that you cannot use a CM12 to set the House Code/Address.
Please note the this module is NOT dimmable. It functions as On/Off only.
Remove the light bulb from its socket and insert the LM15 into the light socket
Insert a light bulb (see Technical Data below for maximum wattage) into the LM15.
Turn the lamp switch on if appropriate
Set any X-10 controller to the House Code and Unit Code you want want the LM15 to respond to
Press the ON button (corresponding to the Unit Code you want the LM15 to respond to) on the X-10 controller three times, at about one second intervals. On the third press, the lamp will turn on signifying that the code has been learnt. To set the code from an IR7243 press the number three times only
To change the code that the LM15 responds to, turn off the power to the unit, turn it back on and repeat the previous step within 30 seconds after applying power

Go to China Light Industry & Daily Use Manufacturer Catalog or China Light Industry & Daily Use Products Catalog to find more China Products!