Founded in 1996, Jiayong Houseware Co., Ltd. is a China cable hanger manufacturer and designer specializing in a wide variety of housewares and household items in China. We have two factories covering 50,000 square meters, and is fully equipped with injection molding, compression molding, CNC machining and quality control. Our raw materials are sourced only from the best suppliers such as Dow Corning (US), GE (Japan), Rhodia (France), Wacker (Germany) and HRS (Korea). Now we are starting pay attention to product R&D and OEM cable hangers services. |
|
There are a two primary methods to hang your front brake cable on your cross bike. There’s the fork yoke which bolts onto the font of the fork crown. The advantages are that you don’t need a housing stop on the headset (and it’s associated stack height). It can also improve cable routing by letting the cable get around even a low handlebar stem without a sharp kink. The disadvantages are that you can’t run a high straddle and if your fork isn’t drilled, you’re out of luck. Then there’s the traditional headset mounted cable stops. They allow practically unlimited straddle cable height. As were alluded to above, the disadvantages are increased stack height and the potential for some pretty nasty cable bends.
|